TurboGPX 0 Posted September 6, 2015 Help! I cannot get TFTP to work! I set my laptop to 192.0.0.128, however, Hikvision Cam doesn't get 192.0.0.64 IP address. I tried connecting my laptop to my HikVision cams via an POE injector and also tried a POE switch, both no luck. Do I need to set each camera to DHCP auto-obtain or fix it to 192.0.0.64? Share this post Link to post Share on other sites
Boogieman 1 Posted September 6, 2015 Help! I cannot get TFTP to work!I set my laptop to 192.0.0.128, however, Hikvision Cam doesn't get 192.0.0.64 IP address. I tried connecting my laptop to my HikVision cams via an POE injector and also tried a POE switch, both no luck. Do I need to set each camera to DHCP auto-obtain or fix it to 192.0.0.64? Use sadp to set the camera to 192.0.0.64...connect ONLY the pc and the camera to the switch..nothing else. Share this post Link to post Share on other sites
TurboGPX 0 Posted September 6, 2015 Help! I cannot get TFTP to work!I set my laptop to 192.0.0.128, however, Hikvision Cam doesn't get 192.0.0.64 IP address. I tried connecting my laptop to my HikVision cams via an POE injector and also tried a POE switch, both no luck. Do I need to set each camera to DHCP auto-obtain or fix it to 192.0.0.64? Use sadp to set the camera to 192.0.0.64...connect ONLY the pc and the camera to the switch..nothing else. IPv4 Address: 192.0.0.64 SubnetMask: 255.255.255.0 DefaultGateway: 192.0.0.128 ??? HTTP Port: 80??? (I previously set it to something else) Share this post Link to post Share on other sites
Boogieman 1 Posted September 6, 2015 Help! I cannot get TFTP to work!I set my laptop to 192.0.0.128, however, Hikvision Cam doesn't get 192.0.0.64 IP address. I tried connecting my laptop to my HikVision cams via an POE injector and also tried a POE switch, both no luck. Do I need to set each camera to DHCP auto-obtain or fix it to 192.0.0.64? Use sadp to set the camera to 192.0.0.64...connect ONLY the pc and the camera to the switch..nothing else. IPv4 Address: 192.0.0.64 SubnetMask: 255.255.255.0 DefaultGateway: 192.0.0.128 ??? HTTP Port: 80??? (I previously set it to something else) The best thing to do is simply reset the camera to defaults....then flash.. Share this post Link to post Share on other sites
TurboGPX 0 Posted September 6, 2015 I tried setting to the following and connected with injector then switch, both no luck. TFTP stuck at "TFTP server[192.0.0.128] initialized" I was able to view the camera at 192.0.0.64 via a browser though. IPv4 Address: 192.0.0.64 SubnetMask: 255.255.255.0 DefaultGateway: 0.0.0.0 HTTP Port: 80 Share this post Link to post Share on other sites
TurboGPX 0 Posted September 6, 2015 Update on this, it ended up I forgot to turn off Windows Firewall. Once it's turned off, my laptop connects to the IPC without any issue. I was able to roll back 4 of my Hikvision cameras to 5.1.6. Thanks Boogieman! Share this post Link to post Share on other sites
