jwp60 0 Posted September 8, 2015 I am running a Vivotek system with 21 IP cameras on it. It has been in place for about 3 years now. Running the free 7501 software for up to 36 cameras. I have a couple of different series cameras on the system and have had no problem until I tired adding a 8000 series camera to the system. I have connected the camera and did a search for the camera and the system found it. The problem is when I insert the camera to the system all other cameras disconnect and the screen on each camera says it is connecting but non of the cameras come back online until I take the new camera back out of the system. Hope this makes sense and that someone can give some advice Thanks!! Share this post Link to post Share on other sites
