Different sensitivity for Snapshot and Recording

[Caporeira 0]

Hi, it is possible to set different sensitivity area detection for snapshot and send email ?

 

And different for recording ?

 

https://www.dropbox.com/s/a04fmmfa9v77zmv/cam1.JPG?dl=0

 

My cameras Dahua:

* BCS-TIP4200 AIR (2.420.0003.0.R, build : 2014-10-15)

* BCS-DMIP1200AIR (2.210.0000.0.R, build : 2014-04-02)

[MaxIcon 0]

Don't think so - that would be handy, though. This would be a good thing to add to future firmware releases, if any manufacturers are paying attention.

 

You can do this in Blue Iris by cloning the camera and using different settings for each version, and it's quite handy. Lots of people use this for a wide variety of things, like what you want to do, making time-lapse and motion detect video from one camera, having different masked areas, and so on.

[Caporeira 0]

Thank you, for your answer. But for this I need computer ?

[MaxIcon 0]

Yes, BI requires a Windows PC, and it can require a good bit of CPU power, depending on the number of cams, resolution, and frame rate. For 2 cams, you could get by with a mid range computer.

 

I don't think there's any way to do this on the camera; at least not on any that I'm familiar with.

[tomcctv 190]

Hi. Any nvr or vms that has face finder on it will do what you need

 

Avermedia geovision avigilon