CPcam 4Ch MPEG Network DVR forgotten password - RCA LINE wit

[rajesh356 0]

I got a old DVR from previous owner which was used for sometime . I powered on its turning on , when i type IP address its asking for Username and password BUT sadly he dont know the username and password , i already tried many default username and password and sadly none worked

 

 

 

http://www.cpcamglobal.com/support/manual/CPD560A_560AS_561ASV.pdf

 

 

when i tried contacting official support they want me to ship it back to them

 

another option mentioned in manual is to connect DVR directly to monitor - but I need RCA LINE with BNC Connector or coaxial Line (As shown in PIC) i asked many shops and none have this -_-

 

Kindly help me reset Password

 

i even opened DVR to find any cmos battery but this model dont have one

[Boogieman 1]

this unit is so old its simply not worth your time.

[rajesh356 0]

this unit is so old its simply not worth your time.

thank you for replying . yes i noticed , but i got 4 cameras also with it , so if i can break the password or the required Cable RCA Line with BNC Connector or COaxial LIne to VGA Female cable for cheap i can monitor with 4 cameras , who would say no to free item ?

[rajesh356 0]

Is there any way to Reset the password .anyone please

[Tleilaxu 0]

have you tried connecting bnc connector on the dvr side and composite chinch (yellow) to te TV? That way you dont have to use vga converter.

[rajesh356 0]

have you tried connecting bnc connector on the dvr side and composite chinch (yellow) to te TV? That way you dont have to use vga converter.

thank you , you mean something like this ?

 

http://www.amazon.in/Coaxial-Coax-Video-Cable-Camera/dp/B00NRQ3QPK?tag=googinhydr18418-21

[Tleilaxu 0]

yes, or you can make your own in few minutes. you connect it to tv screen that has rca input. Then you can use dvrs menu to reset it to factory settings. default local password should be 0000.

 

good luck.

[zaheertaj 1]

please try this

 

user is admin

 

01/10/2015 password is 333200

02/10/2015 password is 666400

03/10/2015 password is 999600

04/10/3015 password is 332800

 

if not then dvr cmose battry pullout and on the dvr then

user admin

password is 000000

 

 

thanks

[rajesh356 0]

please try this

 

user is admin

 

01/10/2015 password is 333200

02/10/2015 password is 666400

03/10/2015 password is 999600

04/10/3015 password is 332800

 

if not then dvr cmose battry pullout and on the dvr then

user admin

password is 000000

 

 

thanks

 

tried , not working

 

i already opened and tried looking for battery like CMOS battery in PC but i couldnt find any

[rajesh356 0]

After i found out exact model of the DVR

 

http://www.cpcamcctv.com/en/spec/Prod/CPD531-spec.pdf

 

 

id

 

http://s10.postimg.org/s127vayh5/IMG_20151002_123631.jpg

http://s10.postimg.org/ddwnzwah5/IMG_20151002_123636.jpg

http://s10.postimg.org/jwu3qkc21/IMG_20151002_124318.jpg

http://s10.postimg.org/ndrkfslqh/IMG_20151002_124637.jpg

http://s10.postimg.org/76pvdh43t/IMG_20151002_124648.jpg

http://s10.postimg.org/shnfhqm89/IMG_20151002_124702.jpg

 

http://postimg.org/gallery/20f3mlndi/

[zaheertaj 1]

This is avtech brand dvr cpd531

[zaheertaj 1]

Short T4 and T5 then input powersupply dvr give long beep then t4 t5 open

restart dvr user admin password admin try it

[zaheertaj 1]

Point t4/t5 near qc stiker

[rajesh356 0]

Point t4/t5 near qc stiker

 

Sir i tried shorting T4/T5 i hear 1 beap for less than a sec when i connect the power cable

 

after reboot i tried admin admin , admin password , admin 0000 but still invalid password , kindly help

 

is my shorting procedure correct ?

[zaheertaj 1]

First short and then on the power (long beep hear and dvr restart (still short and power on) utomatically

[rajesh356 0]

First short and then on the power (long beep hear and dvr restart (still short and power on) utomatically

 

 

 

sir , i turned off DVR-removed PLUG

 

Shorted T4-T5 with Metal CLip

Holding the wire firmly i pluged LIVE power cable

i heard single beap ( i think its normal beap)

 

waited sometime

 

Removed Metal clip

 

powered off the device

 

turned on , still same

[zaheertaj 1]

Try this

[zaheertaj 1]

---------------------------

[zaheertaj 1]

Find near power supply section.

[rajesh356 0]

Sir i found T35 but T36 is not near by (please check pic1

 

there is TR35 & TR36 near by

 

[rajesh356 0]

Sir , is there any update?

[rajesh356 0]

http://null-byte.wonderhowto.com/forum/hack-cctv-private-cameras-0159437/

 

will password cracking works ?if so

 

what is the minimum size of password ? 4 ? and maximum size of password supported by DVR

[zaheertaj 1]

Try

[rajesh356 0]

U R MY Live saver , it worked , it reseted to default IP 192.168.1.10

admin

admin

 

thank you vm

 

but unlike other DVR i used previously Managent page lacks many features such as no option to format HDD

Show HDD usage

 

 

managent page is like

 

-->CONFIG

------>DDNS

------>FTP

------>MAIL

-->DVR

------>Devices [Camera ;Protocol[Normal/P-D] ;Rate[2.4k to 115k]

------>Detection

------>Time

------>Record Time

------>Alert

-->General

------>Log [Logs]

------>Account [Add/Remove Account]

------>Configure [system COnfigure Manage ->Firmware Upgrade Firmware Version : 1158-1012-1021-1014-M1-6C1B

[zaheertaj 1]

thanks