vipercstech 0 Posted September 25, 2015 I am trying to add a Dahua IPC-HDB3200CN camera to my Hikvision DS-7716NI-SP NVR. I have tried all the options I can think of to get this thing working. All the Hikvision cameras are plug-and-play with ip address of 192.168.254.X. Right now I have the IP address for the Dahua camera set to 192.168.254.4. Can anyone help me get this going? Settings I have tried: Management Port: 80 Protocol: ONVIF Management Port: 9988 Protocol: ONVIF Management Port: 80 Protocol: RTSP Port: 554 Stream Path: //cam/realmonitor Management Port: 9988 Protocol: RTSP Port: 554 Stream Path: //cam/realmonitor Management Port: 80 Protocol: RTSP Port: 554 Stream Path: /realmonitor Management Port: 9988 Protocol: RTSP Port: 554 Stream Path: /realmonitor Share this post Link to post Share on other sites
abdelm01 0 Posted October 31, 2015 If you are trying to plug the dahua camera directly into the back of the NVR, it will not work, because Hikvision uses a non compliant version of direct plug and play with dahua. So basically Hikvision just want their cameras to be able to plug in the back of their NVRs, it's all business. To get it to work, you will need to have a separate switch that the NVR plugs to and the dahua camera plugs to. Had the same issue a couple weeks ago. Oh and make sure the switch you get is POE. Share this post Link to post Share on other sites
mstoetz1 0 Posted November 21, 2015 I have the same model NVR and run some DAHUA cameras: You do need to assign a static IP to the camera, after that plug it back into the NVR and add the IP manually to the NVR. Steps: 1. Plug the camera to you router/switch (not into the back of the NVR). Also you need to power the camera. (if it is not a poe switch) 2. Run a computer/laptop on the same network. 3. Download this configuration tool and run it. You'll see the camera's IP showing up there. 4. Double click the IP and modify it to: 192.168.254.100, default gateway: 192.168.254.1 5. Plug the camera to the NVR. 6. Add the camera's IP manually with these settings: Protocol: ONVIF Address: 192.168.254.100 Username: admin Password: admin You need to do this for all the cameras that are a different brand from the NVR (Hikvision). Share this post Link to post Share on other sites
mstoetz1 0 Posted November 21, 2015 btw.. I would make sure you don't have too old of firmware for the HDB3200 camera. Mine are US models, and are using this firmware: General_IPC-HX3(2)XXX_Eng_N_V2.420.0000.0.R.20140414.bin Software Version2.420.0000.0.R, build : 2014-04-14 WEB Version3.2.1.183358 ONVIF Version2.4.1 Share this post Link to post Share on other sites
