blowrabbit 0 Posted March 28, 2006 has anyone ever put more than 2 cams in the SD-1500 ? i got 2 opposing side view cams in but the product specification sheet says you can put 4 side view and one down view. it also shows 2 sizes of housings for the cam. Nobody at ge support knows what i am talking about and they say the sd-1500 will do the job. BS. the sheet shows a second size housing thats both wider and deeper but nowhere is a part number to be seen??? this is nuts i have 2 sideways cams in it and there is less than an inch between them for a down cam ?? the spec sheet is on ge's web site look at page 2.http://www.gesecurity.com/portal/site/GESecurity/menuitem.f76d98ccce4cabed5efa421766030730?selectedID=7826&seriesyn=true Share this post Link to post Share on other sites
JMANOFNVS 0 Posted March 28, 2006 I know you can put 4 in there and 5 shouldn't be to hard if you add it your self. Share this post Link to post Share on other sites
blowrabbit 0 Posted March 28, 2006 do you know this by personally installing the cams ? Share this post Link to post Share on other sites
blowrabbit 0 Posted March 30, 2006 i guess nobody has put more than 2 cams and that would be with one as a downviewing cam [p3 or p5, pinhole] and one or two side viewing high resolution cams into one of these ultra line smoke dectors?? Share this post Link to post Share on other sites
rory 0 Posted March 30, 2006 they sell it with the cams in, not to install cams yourself. Share this post Link to post Share on other sites
blowrabbit 0 Posted March 30, 2006 Its a DIY upgrade according to spec sheets and GE reps. Hasn't someone here got 1st hand experiance with it? Share this post Link to post Share on other sites
rory 0 Posted March 30, 2006 nope, ive only ever installed it as a single camera .. even then it wasnt great for the price .. Share this post Link to post Share on other sites
blowrabbit 0 Posted March 30, 2006 thanks for the response. Share this post Link to post Share on other sites
