haroon552 0 Posted October 11, 2015 DEAR ADMIN COULD YOU PLEASE HELP ME I buy this dvr in local market the model written on this dvr is EVERFOCUS EFC 3004hd but inside the dvr motherboard is from other vendor . I put the recovery usb firmware in usb disk and restarted dvr it shows after boot firmware is flashing do not unplug power ,but after3 minutes it went off and stop on uboot prompt Hisilicon # and was giving message WARNING BAD CRC then i type saveenv and press enter it saved . Now all the uboot environments variables are deleted and booting till Hisilicon # and recovering, i don't have firmware for this card. Card Model number is MBD6004D. Can any body can help me to come alive my dvr. And if some one have this type of card can give me dump firmware. This is the link for dvr motherboard picture http://www.sunywo.com/Product_View.aspx?id=27 Share this post Link to post Share on other sites
waynesmith123 0 Posted November 8, 2015 hi haroon. did you came right with your dvr i also have the same dvr mbd6004d firmware 1.0.1.4742 Share this post Link to post Share on other sites
