bendicion 0 Posted October 15, 2015 Hi guys, i'm using a H.264 AHD DVR and i have install a software call CMS. In that CMS software i have added 4 16CH dvr into it. But i can't view all 64ch main stream at one time. I want to know is there any PC requirements for the software in order to view 64ch. Share this post Link to post Share on other sites
topchips 0 Posted October 23, 2015 Hi You will need at the very least a gigabit network and a high-spec pc with graphics, high end i5 or middle i7, is this for local network or remote? for remote you will need high bandwidth especially on the DVR end, high upload speed, at the PC side, high download, you could also try playing with the bit-rate/FPS and resolution to get better streaming or if the system has dual stream just use the sub-stream Regards Share this post Link to post Share on other sites
bendicion 0 Posted October 30, 2015 hi topchips, i'm using local network to view it. Currently my spec for PC is i3, without GPU 8GB ram and window 10 64bit. This spec able to support 32CH instead? I can't find the CMS software PC requirements spec. Share this post Link to post Share on other sites
