Proper wiring setup for Solar power with HIKvision Camera

[Rock_in_WA 0]

Hi Everyone,

 

I'm trying to set up my HIKvision camera ( DS-2CD2132F-IWS )

for Solar power and had a couple of questions about how to wire things up.

 

I'm planning to use a Renology 100 watt solar panel

paired with their 30Amp charge controller to charge

a UPG 35 Ah (85980/D5722) battery.

 

The things I'm unclear on is where to find an appropriate

power lead to connect the camera to the battery ?

( neither HIKvision or Renology seem to sell any )

 

And wether I would need any kind of a voltage regulator

or fuse to protect the Camera from any possible damage

due to power fluctuations by the battery ?

 

I'm considering buying a second AC/DC adapter for the camera

cutting off the wire from it & using that to connect to the battery

but that seems really cheesy.

 

Also wanted to ask if anyone might know the dimensions

of the power plug for the DS-2CD2132F-IWS ?

 

I'm thinking that it is probably the "standard"

5.5 x 2.1 MM, but that's just a quess.

 

 

Any advice on these questions would be most appreciated.

 

Thanks,

 

Rock_in_WA

Modify message

[Securame 0]

I'm thinking that it is probably the "standard"

5.5 x 2.1 MM, but that's just a quess.

 

Standard power connector, just like this.

 

[Rock_in_WA 0]

Hi Securame,

 

Thanks for confirming the power connector dimensions

I appreciate your assistance : )

 

Rock_in_WA