jrmymllr 0 Posted October 16, 2015 I have three Hikvision DS-2CD2332-I cameras coming and am planning on building a computer as the NVR. I understand that the video can easily be sent to the NVR and processed for motion detection. However, with IP cameras having their own motion detection that likely is more efficient, it would be nice offload this to the camera and scale down the DVR computer. Is anyone familiar with how this can be done, or what VMS software can do this? At this point I don't know if the VMS NVR will run Windows or Linux, but I can deal with either one. As for the VMS, free or low cost is preferred since I'm using this on my house. Share this post Link to post Share on other sites
topchips 0 Posted October 23, 2015 Hi you can use hikvisions iVMS-4200 pcnvr software to run your cams, its compatible on windows 7/8 and 10 and MAC you will need to setup the motion on the cam and on the vms software, the software will find the cams on your network for you , just make sure its all in the same ip range, here are the links for the software http://www.hikvision.com/europe/download_more.asp?id=1365 http://www.hikvision.com/europe/download_more.asp?id=1495 hope this helps Regards Share this post Link to post Share on other sites
