svt11 0 Posted October 22, 2015 Hi, I've got couple DVR's in my work which hold about 40 cameras. There are more than 3 DVR's respectively and I've been given a task to make them visible remotely. Right now I can forward HTTP ports - 8080, 8081, ... 8088. If I don't forward 6036 port then I can't login. Possibly this is the video port. It worked on one DVR but when I've setup NAT on another using the same outside dest address and same 6036 port I couldn't login. So I've changed the port to 6030 on the 2nd DVR. Right now I need more ports to forward the other cameras. What can I do? Thank you. Share this post Link to post Share on other sites
topchips 0 Posted October 22, 2015 Hi Just Log in the devices and change all the PORTs to what you like and forward them accordingly it wont matter unless that port is has already been used there should any way be a reference on your port range on the DVR's Regards Share this post Link to post Share on other sites
