millypolly1 0 Posted October 27, 2015 Can any one help I have a floureon cctv recorder & I am trying to set up motion detection as the instructions are not to clear thanks Share this post Link to post Share on other sites
Wonderlands 0 Posted October 28, 2015 Can any one help I have a floureon cctv recorder & I am trying to set up motion detection as the instructions are not to clear thanks To set up motion detection 1) Login the dvr panel board via CMS software or 32 Bit IE browser. 2) Click Device Config and set the buzzer to ‘on’ 3) Set the alarm duration for as long as it will take you to get back from the monitored area to the DVR 4) Check the tick box for a snapshot when motion is detected 5) Test Walk the area You should hear the buzzer sounds when you test walk, if not try to turn up the sensitivity and try again. And I googled a how-to vids: Hope it helps. Share this post Link to post Share on other sites
