facultative 0 Posted October 29, 2015 I have a 4 channel Techview DVR. It has worked fine for over one year but recently was unplugged for sometime and when I switched it on again all I see where the 4 video images should appear on the monitor is the words "Video Loss". I had assumed that as long as the input cables are connected then the images should appear without configuration. Is this so ? , if not can someone please guide me how to get the live view to appear. Thank you in advance. Gerry Share this post Link to post Share on other sites
tomcctv 190 Posted October 29, 2015 I have a 4 channel Techview DVR. It has worked fine for over one year but recently was unplugged for sometime and when I switched it on again all I see where the 4 video images should appear on the monitor is the words "Video Loss". I had assumed that as long as the input cables are connected then the images should appear without configuration. Is this so ? , if not can someone please guide me how to get the live view to appear. Thank you in advance. Gerry Hi. As well as DVR being powered down was the power to the cameras switched off ? And have you switched that back on Share this post Link to post Share on other sites
facultative 0 Posted October 29, 2015 Thanks for that. I took a look on the floor behind the desk and lo and behold I found the power cables. Many thanks, Gerry Share this post Link to post Share on other sites