Jump to content
antiflow1

Hi All, Yes, I'm new here and looking for HELP

Recommended Posts

Hello to everyone, Well, I'm neck deep into security cameras now but I'm learning as I go...

 

I have a question about the wiring of the pigtail on a mysterious 2.0MP IP Camera that I have, No Brand, No ID, and no picture either. It dose power up and do the home position cruise, but that's it.

 

The Ethernet F/ plug is wired differently than I have seen before. It has from left to right as follows:

 

blue/white

blue

green/white

green

 

Black

Red

 

so the pinout is: 1,2,3, 6, Gnd.

 

But after exposing the rest of the cable there are also red, purple, brown and black that is fused(soldered) to the brown wire.

 

The above wires red,purple,brown & black are not connected.

 

Any Ideas?

 

P.S. I have also tried using a crossover cable but it made no difference.

 

antiflow1

Share this post


Link to post
Share on other sites

i want to know how to connect cctv cameras to tablet or any smart phones

 

Hi, You need the camera to be an IP, Wireless or connected through a DVR or NVR that is connected to the internet.

Then you would have to use an APP on the tablet or smart phone to see your cameras.

 

Hope this helps.

 

antiflow1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×