Trying to set up motion detection with the PSS system

[ff3127 0]

Hello,

 

Can anyone give me some advice about how to get the motion detection to work with the PSS system. I have version 4.06. I had the CCTV system installed yesterday and it is working fine but I would like to get it set up so that it records video in a separate file when it see's movement, rather than having to watch the whole video back through to see if anything has happened. I have a dash camera on my car (Blackvue DR600) which records movement in a separate 'parking mode' file if it see's movement. I want my home CCTV system to do the same.

 

I was not provided with any instructions or operating manuals when the system was installed. I have been trawling the internet all day trying to find instructions on the internet and I have come across a few PSS manually and I have followed the instructions in them for the motion detection to the point where they say it should be set up and working but then I go outside and wave my arms around in front of the cameras but the system still fails to record as having detected movement.

 

I have to say I think the PSS system is extremely difficult and none user friendly.

 

Can anyone offer any advice?

 

Thanks

 

James

[ff3127 0]

Thankyou for the help everyone, I will try to work the **** out myself.

[Boogieman 1]

Thankyou for the help everyone, I will try to work the **** out myself.

You are very welcome. Guess you are part of the entitled generation. Since you are seeking advice, here is some. Next time you visit any forum, instead of being a sarcastic p****, bump your post gently and ask for help.