alexf40 2 Posted November 14, 2015 Hi, I've been reading through all the threads and can't see if v5.3.0 or 5.3.3 will fix the NPAPI plugin support issue, according to a press release I found this was supposed to fixed for the DS-2x cameras in October. Does anyone know what version I need? I'm using Win10 and MS's new edge browser doesn't support NPAPI either. Cheers Share this post Link to post Share on other sites
51cent 8 Posted November 14, 2015 Make sure you don't have gray market cameras before you upgrade the firmware. Cameras bought at ebay or aliexpress are probably gray market/Chinese cameras and will brick with new firmware. Share this post Link to post Share on other sites
alexf40 2 Posted November 14, 2015 The serial numbers don't have CN/CH in but does have CC, how do I tell if the serial number has been hacked? Share this post Link to post Share on other sites
alexf40 2 Posted November 14, 2015 The only reason I wanted to update the firmware was so I could change the motion detection area, I didn't realise this but you can actually change this on the cameras from within the iVMS programme Share this post Link to post Share on other sites
ak357 0 Posted November 15, 2015 The only reason I wanted to update the firmware was so I could change the motion detection area, I didn't realise this but you can actually change this on the cameras from within the iVMS programme Use Firefox Share this post Link to post Share on other sites
drhunter 0 Posted November 15, 2015 In Microsoft Edge browser you need to go to the menu on the right hand side and select open with Internet Explorer, or hit start, type ie and it will appear in the apps list Share this post Link to post Share on other sites
alexf40 2 Posted November 16, 2015 In Microsoft Edge browser you need to go to the menu on the right hand side and select open with Internet Explorer, or hit start, type ie and it will appear in the apps list Ah didn't know that Share this post Link to post Share on other sites
