bunknown 0 Posted November 21, 2015 Hello! After a couple years of sitting, I finally decided to try and set up the home security camera. Everything is working expect the control for PTZ cameras (video and power are working). The installer used cat5e for the control wires. I assumed he used some of the cat 5 wires at the camera end. I do not know which wires he used. (blue/blueW Orange/OrangeW Brown/BrowW Green/GreenW) How should I go about determining which wires he used? I can just unhook the camera from the mount and look..however it is very high and would need a big ladder. Is there a set standard? Thanks for your help. Share this post Link to post Share on other sites
jazzar 0 Posted November 21, 2015 look at the source for the PTZ control - the colour of wires from the controller should then be used at the camera end- only sure way to know will be to get up the ladder and look. data+ at controller should go to data+ at camera, or DATA- A to DATA- A, SOMETIMES THEY CAN BE LABELLED DIFFERENTLY. Share this post Link to post Share on other sites
survtech 0 Posted November 21, 2015 Why don't you just ask the installer? Share this post Link to post Share on other sites
