Ballistic 0 Posted November 30, 2015 Looking at the Hikvision Decoders but trying to figure out if it will do what im trying to do. DS-6401HDI-T http://overseas.hikvision.com/us/Products_accessries_10660_i8695.html When it says 1 Channel output does this allow me to take say like 6 1080p Hikvision cameras and out put them to a mosaic style display? Or if i get the 4 channel or bigger model would that give me 4 different streams of different cameras on each stream? Any more info on these would be much appreciated Share this post Link to post Share on other sites
Securame 0 Posted November 30, 2015 Video Decoding Channels: 5MP: 2-ch; 1080P: 4-ch; 720P: 8-ch; 4CIF: 16-ch It will NOT decode 6 1080p channels. If you want 8ch 1080p decoding, you might go for 6404 model. Share this post Link to post Share on other sites
SunnyKim 2 Posted December 1, 2015 Video Decoding Channels:5MP: 2-ch; 1080P: 4-ch; 720P: 8-ch; 4CIF: 16-ch It will NOT decode 6 1080p channels. If you want 8ch 1080p decoding, you might go for 6404 model. Can you please inform me of the price range of DS-6404? I checked out amazon and aliexpress. It is way too expensive. Unreal???That's why I am asking. Share this post Link to post Share on other sites
Ballistic 0 Posted December 2, 2015 Video Decoding Channels:5MP: 2-ch; 1080P: 4-ch; 720P: 8-ch; 4CIF: 16-ch It will NOT decode 6 1080p channels. If you want 8ch 1080p decoding, you might go for 6404 model. Can you please inform me of the price range of DS-6404? I checked out amazon and aliexpress. It is way too expensive. Unreal???That's why I am asking. They get expensive real fast! The DS-6404 is around $1,400, my wholesaler price is a few hundred below that. The DS-6401 is about $500 I have been trying to find a good way to encode and stream 4 and 6 camera layouts on tvs using a single RTSP stream so i can use raspberry pi's on each TV because i can just stick PI behind a wall mounted TV, and not need to mount a big box or run HDMI.. The problem i get with raspberry pis and trying to stream more than one camera, they get real laggy and become like 20 seconds behind real time.. About the DS-6404, The 4 channels does that mean i can make 4 different camera displays and then have 4 TVs and each TV will have one of the different displays? Like if i did a 2x2 camera layout and had 4 TVs i could display 16 different cameras on the 4 TVs? Share this post Link to post Share on other sites
Jcohen 0 Posted December 3, 2015 Good morning from Venezuela. I hope you can help me, I have installed a NVR Hikvision DS-9632NI-ST with IP cameras DS-2cd2032-i are being perfectly, recently acquired more camera supposedly the same model but have a DS-2cd2032F-i variation when make the connection of new cameras to the NVR does not recognize and assign an IP that is out of range, we put the IP in the range of those that are installed and still does not recognize I hope you can help Share this post Link to post Share on other sites
Boogieman 1 Posted December 3, 2015 Good morning from Venezuela. I hope you can help me, I have installed a NVR Hikvision DS-9632NI-ST with IP cameras DS-2cd2032-i are being perfectly, recently acquired more camera supposedly the same model but have a DS-2cd2032F-i variation when make the connection of new cameras to the NVR does not recognize and assign an IP that is out of range, we put the IP in the range of those that are installed and still does not recognize I hope you can help Please dont post the same question 5 times in the forum. Share this post Link to post Share on other sites
