sheru 0 Posted November 30, 2015 (edited) Hi I want to install 3 ip cameras 2 in front yard and one in my backyard. Sceneriao 1 my router is in the ground floor therefore put the NVR in the ground floor, and run cables externally to it, which worries me that the cables can be vandalised. Sceneriao 2 my router in the ground floor and put the nvr in the ground floor. 3 ip camers to be supplied power by poe injector and connect power-line adapter to the injector and the other powerline adapter to the nvr or router in the ground floor Sceneriao 3 Router in the groundfloor nvr in the loft and powerline adapter to the nvr and the other powerline adapter to the router in the ground floor Little help to make my mind up will be highly appreciated. I am doing this to avoid cables running all over the place camera will be cabled not to worry Edited December 1, 2015 by Guest Share this post Link to post Share on other sites
the toss 0 Posted December 1, 2015 Dont understand how you are getting your PoE to the cameras without running cables to them Share this post Link to post Share on other sites
Boogieman 1 Posted December 1, 2015 viewtopic.php?f=54&t=49047&p=281598#p281598 Share this post Link to post Share on other sites
sheru 0 Posted December 1, 2015 i am looking at wiring the cams with cat 5e cables Share this post Link to post Share on other sites
