DAHUA NVR Problem

[ra1stlin 0]

Hi

 

I have Dahua DHI-NVR4104-W - upgraded firmware to DH_NVR4xxx_Eng_P_V3.200.0000.9.R.20150529

at first it did ask me to set new password - which i did then after some set up i did try to login again - no success.Now i have admin account locked - 888888 and 666666 users doesn't exists (? - changed passwords for them before upgrade but they still should be there) after upgrade.Did try 12.01.2015 account superpassword with no success .Any advise - how to proceed without taking battery out as I'm 1000 miles away from this system and would have to ask friends to do it ....

[Jerboy 0]

The super password would NOT work if you login from the web interface. You should be physically present with your NVR in order to use the super password.

[ra1stlin 0]

Friend did reset it locally ( battery out) its still doesn't let me log in with any password including 000000 from LAN. Any help please ?

[dexterash 0]

For the 100000th time: removing the battery WILL NOT RESET the DVR/NVR/etc. Nor can you use master passwords via LAN.

[helbet 0]

Hi there!

I have a Dahua NVR 104P.

Can I use regular 2.5 inch hard drives? Or it will work only with the specified HDDs from the producer?

I tried to use a regular 250GB WD Scorpio, but the NVR does not see it. Maybe this drive must be pre-formated Ext2 or something like that?

 

Thanks!

[GH75 0]

Hi there!

I have a Dahua NVR 104P.

Can I use regular 2.5 inch hard drives? Or it will work only with the specified HDDs from the producer?

I tried to use a regular 250GB WD Scorpio, but the NVR does not see it. Maybe this drive must be pre-formated Ext2 or something like that?

 

Thanks!

 

 

We use alot of Dahua product, mostly 4216 and their hybrid line. We use WD purple surveillance drives w/o issue. We use 3 or 4TB drives. Straight out of the box and install. We may format it once installed, not sure.

 

But nothing special