logicrussh 0 Posted December 2, 2015 i have 11 cameras connected to the power supply, the model of the power supply is "SAXXON F12V10A18C". Specs: 18 Channels Input: 100-240 AC. Output: 12 V DC. Total Amperage: 10 Amp. Max. Amp: 1.1 Amp/channel. The problem is that one of the cameras has blue image, everytime that i turn off the power supply and i turn on again, the problem has gone, but in about 4 or 5 hours the problem is back again. Share this post Link to post Share on other sites
Segfault 0 Posted December 2, 2015 Sounds more like a camera problem to me, however, did you try another channel? Share this post Link to post Share on other sites
logicrussh 0 Posted December 2, 2015 yes, i already did that, without luck. Share this post Link to post Share on other sites
jeromephone 6 Posted December 4, 2015 check cable connections and reterminate the connectors on both ends of the cable check voltage at camera Share this post Link to post Share on other sites
Knoxville 0 Posted December 10, 2015 Sounds like the cable is picking up resistance ? Replace the cable Share this post Link to post Share on other sites