logicrussh 0 Posted December 8, 2015 Couple days ago i asked for a problem that i had about blue image on one of my cameras, now i saw the playback video of this particular camera and i found this: One day the camara is ok then it changed to Nocturne mode, all good at this point, but when the camera comes back to normal mode it has little red/blue image on it, then it increase to the point i get blue image totally and it stays there all days until i turned off the power supply. Any suggestions on what can i do to solve this? Share this post Link to post Share on other sites
jeromephone 6 Posted February 11, 2016 I would check the camera at the NVR to see if it works ok with a short patch cord. If it does I would look at the power at the camera it could be right on the edge of adaquate power. Share this post Link to post Share on other sites
