lioc57 0 Posted December 22, 2015 Hello I just received my system, I bought on 2 differents reseller (one is *.de but the product come from Hong Kong ... I ddidn't know that). I have a big problem, I connect by POE the camera on the NVR, the light is blinking, the LED are red, but the NVR doesn't recognized the camera. I tried to set the default IP on the port 1 (where I connected the camera) 192.168.1.64, type the default password 12345 ... but nothing is working. Can you help me? THank you Share this post Link to post Share on other sites
GCoco 0 Posted December 22, 2015 I had a problem with a 7716 recognizing one of four 2132 turrets. Had to upgrade to the latest firmware which was 3.4.4 for that NVR. All cameras were recognized. If you have a Chinese NVR upgrading firmware is not an option. Share this post Link to post Share on other sites
lioc57 0 Posted December 22, 2015 Thank you for the response, the nvr has been bought in France and the cameras come from Hong Kong. I did an update of the NVR, and I found an update for the camera but for the moment I can't access them. Share this post Link to post Share on other sites