davidlopez2384 0 Posted January 4, 2016 during the day my cameras are extremely clear, when vehicles pass by the video is perfect. the problem i have is during the night, in IR mode or color mode, vehicles, people walking, basically moving items look extremely unclear. example is a kid was riding one of those hoverboards and he basically looked like a ghost rolling down the street. when a car goes by it is just streaks of light, and you can barely make out the type of vehicle it is. i don't understand how during the daytime they work perfect but not at night. i have a kantech 3TB dvr and Illustra 610 HD outdoor dome cameras any help would be appreciated, thanks. Share this post Link to post Share on other sites
Caroline.N 0 Posted January 8, 2016 check DNR/3DNR(Digital Noise Reduction) Share this post Link to post Share on other sites
SunnyKim 2 Posted January 8, 2016 check DNR/3DNR(Digital Noise Reduction) If I add to above, "please do not expect too much in the night". Cheap Commercial CMOS sensors do not meet your expectation on Low Light Performance. But good news is that they keep improving it. I think 720P and 1080P have improved to some extent, in the night performance. Share this post Link to post Share on other sites
Boogieman 1 Posted January 8, 2016 Set the exposure to 1/30 not lower. Share this post Link to post Share on other sites
Knoxville 0 Posted January 8, 2016 Install more lights around the area you want to view its the lux rating of the camera that's giving you issues Share this post Link to post Share on other sites
tube tech 1 Posted January 9, 2016 see the last paragraph of this post. sounds like the camera designer did not do it right. http://www.mintron.com/HTM/Q&A/Htm/Super%20HAD%20CCD%20camera.htm Share this post Link to post Share on other sites
