smokingjoe 0 Posted January 10, 2016 Hi all Working with a Dahua Hybrid NVR and trying to get it to take a snapshot once an hour 24/7 from four different channels and save the pictures to the NVR hard drive. I am using the N/O input on the back. At the moment I am using a push button to input the alarm. I plan on connecting this input to an external device once I get it to work. The push button is connected to #1 input and ground. I did the snapshot setup per/ Dahua tech support. Every time I press the button it takes several snapshots instead of just one. Has anyone tried to do something like this with the Dahus NVRs before? Share this post Link to post Share on other sites
AgentJ0sh 0 Posted January 14, 2016 Hope this helps Share this post Link to post Share on other sites
smokingjoe 0 Posted January 17, 2016 Thank you for the reply. Working on a project in an assembly plant. I have given up on trying to get the snapshot option to work right when triggered. Took the Hybrid out of service, and purchased a dahua 4K NVR. Plan on setting it up to record on motion 24/7 1fps. This should give us what we need. Thanks again. Share this post Link to post Share on other sites
