MarcinG 0 Posted January 12, 2016 I’m trying to find a surveillance software that allows me to easy access/view camera’s preset locations. Here is the task: We have 13 ip cameras installed under DVR systems (Panasonic WJ-NV200 ) and all works good. However we were unable to EASY ACCESS any preset location thru this system. Lets say each camera has up to 16, or more preset locations. You can access, create and name each preset location thru the IP software located in the camera direct. So we did that, we named each preset location, but when accessing DVR software we are unable to see these names. DVR software does not transfer the names of preset locations, all we can see is just a number 1, 2, 3 ….etc. Really?. What we need is to see on the screen a list of all NAMES of preset locations on each camera and be able to view them. Again, we are looking for the software, or maybe we should create a website using CGI command of Network Camera like http://192.168.0.10/cgi-bin/camctrl?pan=1&tilt=4? Pleased advise, Marcin Share this post Link to post Share on other sites
MarcinG 0 Posted January 28, 2016 id="pmjpegcam" width="640" height="480" classid="CLSID:F3D4C08D-3616-43F0-9E29-44C749B0664B" codebase="http://xx.xxx.xxx.xxx:xxxxx/JpegInst.cab#Version=1,2,0,82" > Share this post Link to post Share on other sites
MarcinG 0 Posted February 10, 2016 Hi Marcin, it’s Me, I mean You. your answer is “frames” for example: first FRAME src="http:// XX.XXX.XXX.XXX:XXXXX /nphControlCamera?Direction=Preset&PresetOperation=Move&Data=3"> *** moves camera to preset position#3 Second FRAME src="http://XX.XXX.XXX.XXX:XXXXX/ImageViewer?Mode=Motion&Resolution=640x480&Quality=Standard&Interval=10" name="camera" scrolling="no"> *** brings the view not sure if it's the best method, but it's working for me, I mean You. Share this post Link to post Share on other sites
tomcctv 190 Posted February 10, 2016 Hi Marcin, it’s Me, I mean You. your answer is “frames” for example: first FRAME src="http:// XX.XXX.XXX.XXX:XXXXX /nphControlCamera?Direction=Preset&PresetOperation=Move&Data=3"> *** moves camera to preset position#3 Second FRAME src="http://XX.XXX.XXX.XXX:XXXXX/ImageViewer?Mode=Motion&Resolution=640x480&Quality=Standard&Interval=10" name="camera" scrolling="no"> *** brings the view not sure if it's the best method, but it's working for me, I mean You. Hi. Is it not easier to set up e-map for locations of PTZ Share this post Link to post Share on other sites
