loginix 0 Posted January 13, 2016 Okay im trying to setup a toggle switch that when it is activated it energizes the door strike and keeps it locked except when cards are swiped, i tried to connect the toggle with a 2 conductor coming back to the panel and a relay on the panel side connected N/C on toggle switch and of course the relay being powered by constant 12v which that is what the relay runs off, i couldn't get this to work also in programming i changed the egress to N/C, any ideas or maybe other inputs i can use on the board that will be easier i am only using a 1 door board. Share this post Link to post Share on other sites
