NON_STANDARD_ONVIF 0 Posted January 21, 2016 Well lets start by doing the hello's. Hi there, my name is Thom Humphries and I have been in the IT industry since the 22-44k modem. XD Now, analog went and IP came, lots of fun and we have a 20 IP camera setup in the company. The NVR that is a windows server 2000 system is getting old and we brought a new NVR from china, that was said to work with our IP cameras. This was not the case and in the end they gave us their cameras that work with the nvr. Problem 1. ALL CAMERAS HAVE SAME IP AND PORT Problem 2. Trying to talk via http, I get "SOAP-ENV:Client HTTP GET METHOD NOT IMPLEMENTED" ON ALL DEVICES. SO! How does one go about changing an IP address if you can not communicate with it? The NVR works fine with the camera, but you are not able to configure from thier NVR. The NVR is - HK-NVR5204Q-P THE ONVIF CAMERA IS - HK-SW312 http://www.kingcctv.com/hk-sw312.html http://www.kingcctv.com/nvr.html Thanks for any input you may provide. I do have a *nix box if that's any help. EOL Share this post Link to post Share on other sites
