volito 0 Posted January 23, 2016 Hope this is right place for question.... I have 2 Lorex 8-Channel HD IP NVR's in my home which is working great. Only problem I have is gaining remote access to one of them via WAN. Seemed to work for initial setup then stops. I am logging in via lorex remote app or PC client. I think my problem is related to adding a netgear wireless booster on first floor where on of the DVR'S are wired in (cat5e)... LAN is>modem>router>various PC's,MACS,wireless devices>downstairs netgear wireless booster>second DVR wired in CAT5e>also acting as another Access Point different name..... Everything is working fine I can log into both when on LAN. When I try WAN only can log into DVR that is plugged into router.... thoughts? I am thinking maybe in the lines of DMZ but booster doesn't seem to have a IP or acting as a router, not sure how it even works I am still few years back on my technology lol....assuming it acts as a wireless switch but if it did it router should forward to 2nd dvr.... Confused on this one any thoughts will be appreciated. TY to all that offer their support on forums... Share this post Link to post Share on other sites
