earlp 0 Posted January 29, 2016 There is no manufacturer name or model number on the box... believe it to be a A/V Tech device. On the front is 4 CH H.264 DVR. Am able to get the motion icon when motion is detected, but it does not record. Share this post Link to post Share on other sites
aibudo 0 Posted January 29, 2016 Do you have a pdf users manual that we could look at? Share this post Link to post Share on other sites
earlp 0 Posted January 29, 2016 Do you have a pdf users manual that we could look at? Do not have a user manual. I have searched the internet and the closest I found that comes close is at this site.... http://www.watcherprotect.com/downloads/Kit%20-%20Product%20Guide.pdf Could not upload the file it was too large. Share this post Link to post Share on other sites
aibudo 0 Posted January 29, 2016 On page 33, make sure that the schedule area is all "blue" to motion record 24hrs. Click "Apply" and "OK". Not relative this, but would recommend setting for Prev and Post to at least 5 seconds and Hard Disk Overwrite checked. Of course, I'm taking for granted that this DVR has a hard-drive installed! Share this post Link to post Share on other sites
earlp 0 Posted January 30, 2016 On page 33, make sure that the schedule area is all "blue" to motion record 24hrs. Click "Apply" and "OK". Not relative this, but would recommend setting for Prev and Post to at least 5 seconds and Hard Disk Overwrite checked. Of course, I'm taking for granted that this DVR has a hard-drive installed! For replying, is the Quote the proper way? I know its tough not having the correct manual, etc. My unit is a bit different than that shown on page 33, but on the schedule selection page there is a screen for Record and a screen for Detection. On both screens 24 hours a day for all 7 days are selected. I'm using only channel 1 and detection is enable for that channel. Would an image of my unit and of the screens help? Share this post Link to post Share on other sites
earlp 0 Posted January 30, 2016 On page 33, make sure that the schedule area is all "blue" to motion record 24hrs. Click "Apply" and "OK". Not relative this, but would recommend setting for Prev and Post to at least 5 seconds and Hard Disk Overwrite checked. Of course, I'm taking for granted that this DVR has a hard-drive installed! I believe this is a closer version of my unit... http://www.mcmelectronics.com/content/ProductData/Manuals/82-13500.pdf Share this post Link to post Share on other sites
