Jump to content
paco06

Dahua DVR 04004-A keeps old configuration from flash memory

Recommended Posts

Hello all,

 

I am facing this issue :

I have a Dahua DVR with some users account, all have forgotten their passwords..

 

I can enter locally with super admin password . User's password may be changed then but after a power reset, the OLD configuration is coming back, ever and ever with unknown passwords.

 

Battery has been removed for 20 minutes, factory reset done, no way . Still the old config. appearing with network, accounts etc. I have found nothing regarding automatic config backup.

 

Interestingly enough, when I successfully change the password, the following message issue :

<< Sauvegarde config. arrêtée >> wich means "Configuration backup stopped"

as if the new configuration could not be saved.

 

Please anybody had this kind of behavior before ?

 

Thanks a lot

 

Patrice

Share this post


Link to post
Share on other sites

Hello all,

 

I am facing this issue :

I have a Dahua DVR with some users account, all have forgotten their passwords..

 

I can enter locally with super admin password . User's password may be changed then but after a power reset, the OLD configuration is coming back, ever and ever with unknown passwords.

 

Battery has been removed for 20 minutes, factory reset done, no way . Still the old config. appearing with network, accounts etc. I have found nothing regarding automatic config backup.

 

Interestingly enough, when I successfully change the password, the following message issue :

<< Sauvegarde config. arrêtée >> wich means "Configuration backup stopped"

as if the new configuration could not be saved.

 

Please anybody had this kind of behavior before ?

 

Thanks a lot

 

Patrice

 

Share it

But you cad hard delete config by youself !!!

Share this post


Link to post
Share on other sites

Share it

But you cad hard delete config by youself !!!

 

 

sorry, I don't understand.

 

Indeed reset can be done but it is lost after a power off-on of the DVR... passwords come back to the original set-up, even if I remove the battery ou do a factory reset.

Share this post


Link to post
Share on other sites

Hi. Admin is the master user .... Super might not have full rights to system setting so will not change .... Log in with admin and password

Share this post


Link to post
Share on other sites

Share it

But you cad hard delete config by youself !!!

 

 

sorry, I don't understand.

 

Indeed reset can be done but it is lost after a power off-on of the DVR... passwords come back to the original set-up, even if I remove the battery ou do a factory reset.

 

You send me file passwd from you DVR and i saw user and recovered thei password.

So share you DVR tro internet (telnet port) and i will see, what's happenig!

Share this post


Link to post
Share on other sites
Hi. Admin is the master user .... Super might not have full rights to system setting so will not change .... Log in with admin and password

I think there is other problem there.

Hi can change aal, but after reboot all the same!

The recovered password is normal, not random and i think configuration don't save, because .....

Share this post


Link to post
Share on other sites

I do not have access to the DVR, it is on a remote office, and i will not go back there before 2 weeks...

I send to you via PM the DDNS Hostname anyway

 

Thanks for your concern.

Share this post


Link to post
Share on other sites
I do not have access to the DVR, it is on a remote office, and i will not go back there before 2 weeks...

I send to you via PM the DDNS Hostname anyway

 

Thanks for your concern.

 

I'm in!

So ....

Anybody can enter!

It's very bad!!!

 

machine		: mb680
processor	: 0
cpu family	: sh4
cpu type	: STx7105
cut		: 4.x
cpu flags	: fpu
cache type	: split (harvard)
icache size	: 32KiB (2-way)
dcache size	: 32KiB (2-way)
bogomips	: 446.46

 

 

 

dev:    size   erasesize  name
mtd0: 00060000 00020000 "boot"
mtd1: 00400000 00020000 "rootfs"
mtd2: 00600000 00020000 "user"
mtd3: 00180000 00020000 "web"
mtd4: 00280000 00020000 "slave"
mtd5: 00020000 00020000 "custom"
mtd6: 00040000 00020000 "logo"
mtd7: 000a0000 00020000 "config"
mtd8: 000a0000 00020000 "config1"

 

 

local Hardware =

{

board =

{

name = "DVRxx04LE-A",

version = "x.xx",

extInfo = ''

},

};

 

return Hardware;

 

--

-- "$Id$"

--

 

 

 

I'ts common problem, because telnet is don't close & all know password!!!

Share this post


Link to post
Share on other sites

Accept my congratulations to

Bitcoin miner settled in your DVR!

.btce

 

Remove it or keep it?

 

But next time he return again because telnet is open!!!

Remove you DVR from full share and open only 37777 port

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×