Possible to view a hikvision ipcam on a dahua vth intercom ?

[kasperskie 0]

Does anyone know whether it is possible to view a hikvision ipcam on a dahua intercom system such as the vth1510/1550 ?

 

These intercom systems indicate support for a onvif camera and allows me to enter a user/pwd together with an ip (only the ipv4 numbers like xxx.xxxx.xxx.xxxx , not any custom url) and port number.

[smp72 0]

Hi, I'm trying to do the same thing. Did you have any success??

[smp72 0]

I got it to work. My problem was that my cameras were connected to the NVR directly and using the built in POE switch. I connected a cable between one of the camera ports on the NVR and my network switch and I was then able to add the cameras to my VTH1550CH intercom monitor. Used port 80 and onvif.

[lore 0]

Hi,

I'm desperate, I spent hours trying to view the video stream from my hikvision DS-2CD2042WD-I (that clearly works fine if I view it on the PC software) on the VTH1560 Dahua intercom (black screen).

 

This what I have done, any ideas? Thanks in advance

 

HIKVISION Main stream (just for info)

 

 

HIKVISION Secondary stream (for what I know the one taken from the VTH)

 

 

VTH CONFIG

[Securame 0]

Port 554 is the RTSP port. Do as smp72 said and try port 80.

[lore 0]

Thanks for the answers but the problem is that I already have all the cameras connected on the same network (everything is on the same switch) and I also tried all the possible ports configured in the hikvision different protocols but nothing (80, 8000, 554, 443).

 

Can it be that hikvision video format is not compatible (not just a resolution problem) due to parameters like variable bitrate, frame type, etc...

 

Can somebody post his configurations?

 

It would be really helpful.

 

Lorenzo

[dyzio 0]

Hello, did someone managed to solve this issue? I've got 5 cameras and nvr and none of them works with vth1550, please help !!!