journey_era 0 Posted February 17, 2016 One . of the IP camera has IP address starting from 169.254.0.99 ,I have assigned IP address that's in my LAN range 10.0.0.1. Now I can access camera from both IP . How do I fixed this issues . Why this kind of issues occurred ? Share this post Link to post Share on other sites
khx73 0 Posted February 18, 2016 That's an automatic IP it assigns itself when it can't find a DHCP server. Configure it for static ip. Use SADP tool to configure it, if you can't connect to it anymore. Share this post Link to post Share on other sites
journey_era 0 Posted February 18, 2016 That's an automatic IP it assigns itself when it can't find a DHCP server. Configure it for static ip. Use SADP tool to configure it, if you can't connect to it anymore. I tried to download the SADP tool , seems good one to work (I googled it ) but after installation , it doesn't scan nor shows any Devices connected . Share this post Link to post Share on other sites
Rakibsikder 0 Posted March 7, 2016 i have an ip camera this model noumber is Avtech AVN301 But i has lost software so i can't use this. any one help me about this and software. Share this post Link to post Share on other sites
ben_indo 0 Posted March 8, 2016 SADP Tools is for Hikvision Camera only. If your camera is AVTECH, SADP not able to detect it Share this post Link to post Share on other sites
ssmith10pn 0 Posted March 8, 2016 Set your computer to 169.254.x.x with a 255.255.0.0 subnet mask and log into the camera and setup the ip parameters. Share this post Link to post Share on other sites
journey_era 0 Posted April 2, 2016 thanks everyone . I just Ran the Installation Wizards2 tool and went throught the and changed the IP addresses . Share this post Link to post Share on other sites
