Can someone clear something up for me please

[Big Jim 0]

I was given this DVR system

http://www.thinkcctvsystems.com/store/four-camera-cctv-systems/37-cnm-1tb-cctv-kit-4-channel-h264-network-dvr-with-4-x-ccd-security-cameras.html

 

It only had 2 cameras with it so I went on ebay and bought these

http://www.ebay.co.uk/itm/351575291566?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

They don't work on my system, I can see that they are getting power as the LEDS light up but they don't display video (although they do remove the error message about no video feed), I have tested the cameras on a friends system and verified that they work, so it seems to be a compatability issue.

 

Reading the spec from the link above it seems that the system supports D1 capability which I am led to believe from this forum is 720 x 576 (Pal)

The cameras that came with it are apparently 420TVL and 500 x 582

 

So I searched on ebay for some 600TVL cameras and they are all listed as 500 x 582 as well

 

 

Argghhh

so much confusion.

 

All I want to know is what the best quality camera I can buy and run on this system is.

 

Thanks

James

[aibudo 0]

How are you monitoring your initial DVR? VGA/PC? Are you sure that the DVR is set to PAL and not NTSC?

[tomcctv 190]

I was given this DVR system

http://www.thinkcctvsystems.com/store/four-camera-cctv-systems/37-cnm-1tb-cctv-kit-4-channel-h264-network-dvr-with-4-x-ccd-security-cameras.html

 

It only had 2 cameras with it so I went on ebay and bought these

http://www.ebay.co.uk/itm/351575291566?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

They don't work on my system, I can see that they are getting power as the LEDS light up but they don't display video (although they do remove the error message about no video feed), I have tested the cameras on a friends system and verified that they work, so it seems to be a compatability issue.

 

Reading the spec from the link above it seems that the system supports D1 capability which I am led to believe from this forum is 720 x 576 (Pal)

The cameras that came with it are apparently 420TVL and 500 x 582

 

So I searched on ebay for some 600TVL cameras and they are all listed as 500 x 582 as well

 

 

Argghhh

so much confusion.

 

All I want to know is what the best quality camera I can buy and run on this system is.

 

Thanks

James

 

Hi. You might not have a problem ....... You might have two channels switched off for viewing

 

To test this do an easy test.

 

Remove camera that you know is working on your dvr and move the BNC to one of the ports you have tried the new camer on and see if it displays or not

[Big Jim 0]

I was given this DVR system

http://www.thinkcctvsystems.com/store/four-camera-cctv-systems/37-cnm-1tb-cctv-kit-4-channel-h264-network-dvr-with-4-x-ccd-security-cameras.html

 

It only had 2 cameras with it so I went on ebay and bought these

http://www.ebay.co.uk/itm/351575291566?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

They don't work on my system, I can see that they are getting power as the LEDS light up but they don't display video (although they do remove the error message about no video feed), I have tested the cameras on a friends system and verified that they work, so it seems to be a compatability issue.

 

Reading the spec from the link above it seems that the system supports D1 capability which I am led to believe from this forum is 720 x 576 (Pal)

The cameras that came with it are apparently 420TVL and 500 x 582

 

So I searched on ebay for some 600TVL cameras and they are all listed as 500 x 582 as well

 

 

Argghhh

so much confusion.

 

All I want to know is what the best quality camera I can buy and run on this system is.

 

Thanks

James

 

Hi. You might not have a problem ....... You might have two channels switched off for viewing

 

To test this do an easy test.

 

Remove camera that you know is working on your dvr and move the BNC to one of the ports you have tried the new camer on and see if it displays or not

Already tried that and it was the same.

 

And I have tried both PAL and NTSC and neither makes any difference

[tomcctv 190]

So moving a working camera from a working port to another port .... Never showed the camera working

[Big Jim 0]

So moving a working camera from a working port to another port .... Never showed the camera working

 

That is correct.

 

So just to be clear

the existing 2 cameras work fine on any port

the remaining 2 video feeds show "video loss" on the screen

 

as soon as I plug one of the new cameras in it takes the "video loss" message off the screen but the screen remains black, I can also see the new cameras are getting power because when i cover up the light sensor I can see the IR LEDs light up.

 

 

EDIT:

As a sanity check I have connected the camera up again and gone in to the menu and had a look around for any settings that might help me.

By adjusting the Luminosty and contrast to maximum I have an extremely distorted grey image, and I can *just* about make out the image I am looking at.

 

Have a look at the attached image, you can just about make out the plant that it is pointing at