carlosbaratela 0 Posted February 25, 2016 Someone has faced the blue screen problem playing without any gap in the timeline? I use the Control Center 11.0.1 Build 2 and am with this problem on several cameras Share this post Link to post Share on other sites
survtech 0 Posted March 1, 2016 Someone has faced the blue screen problem playing without any gap in the timeline? I use the Control Center 11.0.1 Build 2 and am with this problem on several camerasNot sure I understand your problem. There are so many possibilities it's hard to pin down any single one. First, do any cameras drop off the system when in "Live"? Second, what make and model cameras? Third, what stream are you recording, TCP/IP Unicast or something else? Do you get a message saying "No footage is available for the selected camera"? Share this post Link to post Share on other sites
carlosbaratela 0 Posted March 8, 2016 In "Live" there is no problem, the image appears normally. Cameras that use are IndigoVision Model 11600 and Model 11410. I use multicast recording flow. I get no message, only during the playback screen is solid blue and back to normal, sometimes flashes quickly, sometimes turns blue for thirty seconds. ____ tks Share this post Link to post Share on other sites
survtech 0 Posted March 8, 2016 Could you test recording in TCP/IP Unicast? That is the recommended mode by IndigoVision. Share this post Link to post Share on other sites
