tony.nauta 0 Posted March 8, 2016 I want to use a Bosch 600 series to register work proces flow in a factory. The security system is already installed and records all activity. So why not BUT: the system camara's are following an automatic motion pattern. I need one camera to keep a fix position. How do i disable the automatic motion pattern on this camera? Share this post Link to post Share on other sites
Sam228 0 Posted March 8, 2016 By "automatic" pattern, do you mean it was hooked up to power ans just started doing its thing, or did someone actually program that pattern? I assume like in any other case I can think of, you just need to find the appropriate section of the menu related to PTZ settings. Depending on what you having it running to, the settings might be contained within the recording device or the camera itself. I'm not 100% familiar with the Bosch line. Share this post Link to post Share on other sites
tony.nauta 0 Posted March 8, 2016 By "automatic" pattern, do you mean it was hooked up to power ans just started doing its thing, or did someone actually program that pattern? Someone actually programmed that pattern but does not know how he did it. It was sometime ago. It's perfect for surveillance but not if I want to register the workflow of the production process. Share this post Link to post Share on other sites
Sam228 0 Posted March 8, 2016 Are you recording the feed? If so, what is it recording to; standalone NVR, computer+software...? How are you able to interface with the camera? Share this post Link to post Share on other sites
tony.nauta 0 Posted March 8, 2016 It's a standalone DVR system. images are recorded onto the HD of the system. I found a manual on internet but it's vague on disabeling the TPZ mode. I hope that someone knowing the specific system can help me. Share this post Link to post Share on other sites
Sam228 0 Posted March 8, 2016 The settings are going to be on the DVR. Any manual you find for the DVR is going to be a nightmare; don't waste your time. Try searching for articles or videos about what you need by the make and model number of the DVR. Share this post Link to post Share on other sites
jazzar 0 Posted March 12, 2016 see manual section 3.4 and 3.5, you need to access the camera menus via the controller or keyboard. once in menus adjust as needed - check for what the camera does on boot up ie go to a preset or a tour or nothing. you could set up a preset for the view you want then simply call the preset if you use the camera to look elsewhere. Manual:- http://resource.boschsecurity.com/documents/AutoDome_600_Operation_Manual_enUS_9007201731385867.pdf goodluck. Share this post Link to post Share on other sites
tony.nauta 0 Posted March 12, 2016 Jazzar Thanks very much for your answer but Bosch makes it confusing using the nummer 600 several times for diverent productlines. The productline I am using is explained in this manual: http://www.manualslib.com/manual/592871/Bosch-600-Series.html Share this post Link to post Share on other sites
