sethlocks 0 Posted March 22, 2016 Hello, I have a Hikvision IP camera with a solid state relay output. This allows small amounts of voltage to pass though the open contact which is ruining a planned integration to an electric strike. It is enough voltage to hold a relay coil once it has been opened. I have tried resistors or diodes, but then the voltage drops too much to trigger the coil. I have made this work with various access control panels with a dry contact input. For some reason these systems are not as sensitive to small amounts of bleed. Does anyone know of a dry contact triggered relay? Currently I have this set up with an Altronix ACM4, but that is too big and total overkill for such a simple thing. Any help or comment appreciated. Thanks, Seth Share this post Link to post Share on other sites
