Audio on Failed

[hyperman88 0]

Hi Team,

 

I have NVR HIKvision with model DS-7716NI-E4 / 16P. I'm using a web base to access the CCTV in our outlet. I'm having a hardtime to enable the audio because of the error message Äudio on Failed".

 

Please advice.

 

Thanks and Regards,

Hyper.

[Securame 0]

Does the camera you have selected actually have audio?

And is it enabled on the channel, is the stream video+audio, or just video?

[hyperman88 0]

Hi Securame,

 

Appreciated your reply. My camera has no audio. I'm using MIC which has a RCA connector.

 

Thanks and Regards,

hyper

[Securame 0]

What camera is it? It does not have audio, but it has audio input??

 

If you are trying to use the RCA audio input on the NVR; nope, that will not work.

[Daryl733 0]

The Mic have to be connected to the IP Camera's Audio Input.

Depending on which model of IP camera, you might need to select type of mic you are using, i.e. Line Mic (Powered Mic with preamp) or just unpowered mic.

 

Connect directly to the IP Camera interface and troubleshoot that first before doing it through the NVR. At least you can isolate the issues.