(HELP) Setting up Qvis Atlantis D1 remote viewing for phones

[hardacre221 0]

Can anyone help me setting up my cctv remote viewing on my phone? Not really clued up on port forwarding and stuff, I have setup it up so i can log into my cctv on my computers. This is what i have done so that i can log into my cctv on my computers:

 

First: Connected up my cameras&all my wires inc my ethernet to my dvr.

Second: Went on my computer went on run (cmd) then type in ipconfig etc.

Third: Put all the ipconfig what i needed into the dvr, changed the http port to 8080 and changed the media port to 34567.

Fourth: Log into my sky router went to advanced to services add port 8080 for start and finished do this twice for TCP then for UDP.

Fifth: Check to see if port 8080 is open on canyouseeme.org which it is and then log into 192.168.*.**:8080

 

i need help with setting it up on to my phone i've tried doing it the same way i done it with port 8080, but the port not opening when i check it on canyouseeme.org?

 

Thanks.

[tomcctv 190]

Hi. What platform is your mobile ?

 

You will need an app to view your system and you will also need to change your media port to 34599

[hardacre221 0]

On netcofig on the dvr the moblie is 34599 so when i try to change the media port to 34599 it says port conflict? I would be using a iPhone 6s to view the camera's any also, when it comes to figuring how to do this on services on my sky router when i add the custom service what service type should i set the port to TCP or UDP?

 

Thanks, for you reply.

[tomcctv 190]

On netcofig on the dvr the moblie is 34599 so when i try to change the media port to 34599 it says port conflict? I would be using a iPhone 6s to view the camera's any also, when it comes to figuring how to do this on services on my sky router when i add the custom service what service type should i set the port to TCP or UDP?

 

Thanks, for you reply.

 

 

Hi. Sorry open port 34599 on your router and select both tcp/up

 

And use this app

Discovery HD app by Qvis Labs, LLC.

https://appsto.re/gb/MGsnG.i

[hardacre221 0]

On netcofig on the dvr the moblie is 34599 so when i try to change the media port to 34599 it says port conflict? I would be using a iPhone 6s to view the camera's any also, when it comes to figuring how to do this on services on my sky router when i add the custom service what service type should i set the port to TCP or UDP?

 

Thanks, for you reply.

 

 

Hi. Sorry open port 34599 on your router and select both tcp/up

 

And use this app

Discovery HD app by Qvis Labs, LLC.

https://appsto.re/gb/MGsnG.i

 

I have open the port on my service the start & finish 34599 and as TCP/UDP then add it into my inbound with the ip of my dvr but when i try to change my media port on my dvr to 34599 it still says port conflict

 

Thanks.

[hardacre221 0]

I'm sure I'm doing everything right i tried open the port with 37777 and did the same with 34599 so when I check it on canyouseeme.org it says the ports isn't open

[tomcctv 190]

Can you post a picture of your dvr setup screen

[hardacre221 0]

Here a picture of the network

[tomcctv 190]

Hi. Ok that is not the atlantis

 

You need this app and keep the port as 37777

 

iDMSS HD Lite by ZHEJIANG DAHUA TECHNOLOGY CO.,LTD.

https://appsto.re/gb/CTW3E.i

[hardacre221 0]

It is it says on the box Qvis Atlantis d1 & on the invoice. I have keep the media as 37777 but when I try to open the port on the router it's not opening as when I check it on canyouseeme.org it say error port isn't open

[tomcctv 190]

It is it says on the box Qvis Atlantis d1 & on the invoice. I have keep the media as 37777 but when I try to open the port on the router it's not opening as when I check it on canyouseeme.org it say error port isn't open

 

 

They had a few units called Atlantis...... But it's best known as a dahua.

[hardacre221 0]

Alright, how can I get this port open its a sky fibre optic router I have watched all tutorials on port forward and its still not working?

[tomcctv 190]

You have IPv6 enabled on your router un tick it and try

[hardacre221 0]

You have IPv6 enabled on your router un tick it and try

 

Still not opening, it says on canyouseeme.org the reason is no route to host?

[tomcctv 190]

Have you tried the app with your local ip

[hardacre221 0]

Which way ?