stc2003 0 Posted May 5, 2006 I have installed this camera and have communication from my com2 port, on my PC based DVR, to my camera, BUT i have NO idea how to get the display/setup menu from the camera off, or even access it. The manual doesn't make any reference to how you actually get to it... can anyone help with this? Share this post Link to post Share on other sites
VST_Man 1 Posted May 6, 2006 all ptz's use code to enter the menu system. these codes are sent via you comm port you have connected, via ptz keyboards, and some unique hand held stuff. the codes to enter and how you send these codes vary from ptz to ptz. ie. I use a pc based dvr and have my ptz's connected to comm port 2 (data converter). one of my ptz allows me into the menu settings by clicking on the #1 preset twice. Once in I used the ptz controls to move thru the menu. my second ptz is different as it does not allow my pc based ptz control to enter via any preset sent. I had to find and use a seperate software program that I run from the pc based dvr that is basic; you type in the command code and hit enter.....and I enter code 64 twice and then the menu pops up on the screen.and fromm there I use te ptz controls to move around. Pm me and I'll send you the preset.zip file. Share this post Link to post Share on other sites
stc2003 0 Posted May 12, 2006 thanks for the reply but i was able to get it up and running about an hour after i had posted the messege and had forgotten i had posted it. Thanks for taking the time and helping out. Share this post Link to post Share on other sites
bawho 0 Posted July 29, 2015 I have installed this camera and have communication from my com2 port, on my PC based DVR, to my camera, BUT i have NO idea how to get the display/setup menu from the camera off, or even access it. The manual doesn't make any reference to how you actually get to it... can anyone help with this? Share this post Link to post Share on other sites
