Scottish 0 Posted April 7, 2016 Morning, I have a project that requires 9x 3MP IP Cameras to be installed on a remote building and need a Wireless option to bring them back to the NVR the distance is about 300 feet, used the NANO M5 before but not sure if it could handle 9 cameras? Any ideas Cheers David. Share this post Link to post Share on other sites
Daryl733 0 Posted April 7, 2016 Nano M5 max throughput is 150Mbps. Theoretically, you can stream 9 Cameras at max 16Mbps/Camera. 3M cameras' recommended bitrate is ard 5Mbps. So you should have enough, depends on your actual throughput of your wireless connection which varies depending on site condition. Normally I get ard 80-90% signal strength with line of sight at around 1km. But that varies site to site depending on the site condition. Just remember the higher the bitrate you set your camera to, the higher the disk consumption. Share this post Link to post Share on other sites