drdcc 0 Posted April 11, 2016 Hello. I bought a Dahua 5108C (branded ADT) 960H DVR from US and I would like to use it in Europe. Under settings, I have only NTSC option and cannot be changed to PAL. There is a firmware upgrade that could offer both options NTSC and PAL ? Model: DVR5108C-ADT-1 Channels: 8 System version: 2.616.AT24.0 Build Date: 2014-01-26 Web: 3.1.0.3 Thanks. Share this post Link to post Share on other sites
nikey22 0 Posted November 17, 2018 looking at the http://www.dahuasecurity.com website, I see: DH_HCVR5108H_Eng_P_V3.200.0001.30.R.20170807 In the applicable models, it shows: HCVR5104HC as one of the units. I'm not sure if this is yours I'm unsure what the HC stands for? The NTSC version is on the website there as well (probably the one you had factory installed): DH_HCVR5108H_Eng_N_V3.200.0001.30.R.20170807 use at your own discretion since it is branded ADT, it would probably be easier to call ADT and see if they have their own "general" firmware variant of the dahua ones. Good luck. Share this post Link to post Share on other sites
