spikecoos21 0 Posted April 14, 2016 New rg59 was ran to the camera. From time to time the camera would get fuzzy and go black. Then it would go back to normal. I included a picture. Thanks http://imgur.com/jgv6lEU Share this post Link to post Share on other sites
ryan.cantonk 0 Posted April 14, 2016 Check if the network connection is good?Or try to connect the network cable to your computer directly instead of via router. Share this post Link to post Share on other sites
t310483317 0 Posted June 1, 2016 How are you powering it? Share this post Link to post Share on other sites
dambratechnology 0 Posted June 28, 2016 how long is the cable run? Share this post Link to post Share on other sites
spikecoos21 0 Posted April 30, 2017 The camera is powered from a 16 channel power supply box. The cable length is ran from the 5th Floor to the 1st Floor. Thanks Share this post Link to post Share on other sites
captainvideo 0 Posted May 2, 2017 When you say 5th floor to 1st floor ,does that mean 60' or 200' or ? ? ? I would check the voltage at the camera .(free) If the voltage is good ,then make sure your bnc connections are secure .(free) If you made the connections on the siamese cable then redo the ends .just 1 strand of the shielding touching the stinger or core Will cause all kinds of trouble .if you ran cheapie pre-made cable then that may be the problem . Share this post Link to post Share on other sites
