uglyb0b 0 Posted May 10, 2006 hi all- i was wondering if i could use a VGA extension cable that would be between the Geo card (1240) and the "cable dongle" that has all the BNC inputs. im replacing a DVR, and the new one is too big to fit where the old one is, and it would be easier to use the VGA extension rather than extend 16 bnc cables. i temporarily put one on, and it works, but i was hoping to hear from others with any experience with doing so. thanks! Share this post Link to post Share on other sites
ezCCTV 0 Posted May 12, 2006 I have seen this on an install before, I would check to make sure that all pins are wired straight trhrough pin to pin. As it is an extension cable, this should be the case. Share this post Link to post Share on other sites
iSpyVision 0 Posted May 13, 2006 One of our dealers installs the same way with the extension cable2 when the customer doesn't want 16 coax cables running down the wall. Share this post Link to post Share on other sites
