ybarakov 0 Posted April 23, 2016 Dear Colleagues, Unfortunately after suggested firmware upgarde I have bricked my camera. Upgrade was suggested because of not functioning PTZ functionality, after discussing and remote testing the camera by technician from the escam company. I do not blame him, since each firmware upgarde is on each own risk. Camera is not operative, LAN port is stil blinking, IR LEDs working. I have read topic for debrickong the Dahua camera, however I am experiencing problem in identification of IP address of the camera. Tried conecting the camera and computer with lan cable, checking the previous IP address (camera was used only with WIFI, I am not sure whther last wireless address is the same as of LAN one.) Tried with 192.168.1.188 without success, several restarts were done, several resets also-no success. Thank you for oyur support in advance. Best regards Share this post Link to post Share on other sites
