Drogan 0 Posted April 27, 2016 Just joined this forum in the hope I can get some help with something that is driving me crazy. I've got a basic 1 camera CCTV setup with a single 1080p SDi camera attached to the PC via a 30mtr length of coax using a Blackmagic mini recorder card. Everything was working perfectly for 2 years until I had to re-install Windows. I've been using ContaCam software which does all I need, but now it works OK for about 2-6 hours then stops. If I restart the camera all is OK again for another few hours. I've tried using iSpy too and it is the same. Any ideas please? Share this post Link to post Share on other sites
