znl7 0 Posted April 30, 2016 Hello friends. AHB780XT8-3520D V1.01 Hdmi out working but vga out not working. Can you help me? Share this post Link to post Share on other sites
Daryl733 0 Posted April 30, 2016 Did you check with the vendor ? Can't find any information online and I'm not going to open those .doc files that the search results returned. This is one of those unbranded equipment. You'll most likely need to check with the vendor. Either 1. The port is there for show and not a working port. Seen a few of those before. Including on PC as well. 2. There's a hardware/software switch to alternative between HDMI/VGA (Only 1 can be working at any one time). - Try disconnecting your HDMI and only connect a VGA cable. Switch off the system and power it back on and see if there's output on VGA. 3. Some configuration in the DVR to enable or select the port. Here's a russian site on it. https://www.drive2.ru/l/8412045/ Can use google translate to english. Share this post Link to post Share on other sites
tomcctv 190 Posted April 30, 2016 Hi if you have used the hdmi port and then gone to vga then your resolution is out of range Plug your hdmi in and set the resolution to vga Share this post Link to post Share on other sites
