Dahua VTO200A not push alarm

[sklark 0]

Hi,

Please help me this problem

the doorbell VTO200A does not work with a phone.

Dahua without the support.

uiCk9b6NHTk

[tomcctv 190]

Hi. First thing is remove all the 3 apps you have it connected too.

 

In your video you send a command then switch to another app to control it while connected to the first app.

 

Remove all apps and install the dahua app again from the play store.

Then connect to your door entry via your PC and reset it. Then in network settings click on p2p and scan the QR code with your cell and see how it works

[sklark 0]

I do not have the option p2p

[tomcctv 190]

Hi. What network setting show on the screen

[FRoss 0]

Hi! Say me, please, does VTO2000A works with iDMSS directly, without inside monitor (VTH, etc.)? For example, could I talk with calling visitor and open magnetic lock? It makes no sense to hang one more screen when the house there are five or six iPad's. Thanks.

p.s. sorry for my bad english...)

[saniman 0]

Hi there.

Do have a or can direct me where to find the firmware for this.

Mine still using old firmware where i dont have the p2p/push function.

Any help will be hot.....

[what-da 0]

Hi Dahua usually have 3 different firmware for each unit. From memory they have Firmware Support Push Notification, Firmware for SIP, Firmware for VTMS Management Center software.

 

You need to find the firmware for push notification. I use to have it and if I find it I will post it.

Also if you want to play around with VTMS then message me.

 

Their is also some settings in the unit that you need to setup to make the VTO see the mobile as VTH. Once again I will try to find the documentation on how to set it up. Its been a while since I played with Dahua.

[andrejsvet 0]

I also bought doorbell VTO200A and I am able to connect to device from iphone using iDMSS plus application - video and audio works. I also setup in IDMSS the push notification. The only problem is that there is no notification message on iphone when the bell button is pushed on device. Is anyone managed to get push notification on the phone?

[fitto 0]

On 5/21/2016 at 7:59 PM, FRoss said:

Hi! Say me, please, does VTO2000A works with iDMSS directly, without inside monitor (VTH, etc.)? For example, could I talk with calling visitor and open magnetic lock? It makes no sense to hang one more screen when the house there are five or six iPad's. Thanks.

p.s. sorry for my bad english...)

Hi, did you find a solution?

I've the same problem I bought a VTO2000A without monitor VTH and I'm not receiving push notifications.

Thanks.

[FRoss 0]

20 minutes ago, fitto said:

Hi, did you find a solution?

I've the same problem I bought a VTO2000A without monitor VTH and I'm not receiving push notifications.

Thanks.

Hi! 2000A doesn't work with app directly. Only through VTH or DSS server.

The solution is VTO2111. It works correctly without VTH.

[fitto 0]

1 minute ago, FRoss said:

Hi! 2000A doesn't work with app directly. Only through VTH or DSS server.

The solution is VTO2111. It works correctly without VTH.

Thank you very much and happy new year!