oh6hfx 0 Posted May 13, 2016 Again a tricky problem. I have client with Dahua NVR-4116H running in his office having 10/10 fiber connection. Now I installed one Dahua IP-camera at his home (30km away from office). Also with 10/10 fiber. In his fiber he has dynamic IP. If I input home IP in the office NVR when I add camera, it works ok! Having port forwarding done in his home fiber router. So I have his home camera working as one local camera. Problem is when his home fiber ip changes. I have already set up a dyndns address to access his ip camera at home, but Dahua NVR does not accept written adresses in the ip field. I'm wondering if there would be a solution to do this with some router (local or not), so that I put routers address in the camera ip field and then set up a route that if NVR ip asks port 37777 from router IP, it is redirected to home ip address? Would it be done by local Windows7 PC which is running 24/7 ? Share this post Link to post Share on other sites
oh6hfx 0 Posted May 13, 2016 Well, replying to myself. The answer was simpler than tought. Updated the NVR with newest Dahua FW DH_NVR4xxx_Eng_P_V3.201.0000.0.R.20151120 Works well! Share this post Link to post Share on other sites