PTZ settings

[Nelix 0]

Hi all

 

I have a question regarding PTZ.

 

I currently have a Vista Dome with EX480P camera installed that is being controlled by a vista NPX/KBD/J3De keyboard, it all work very well.

 

I have recently purchased a HikVision DVR so that I don't need to have a PC switched on 24/7 to record footage. The DVR has RS-485 connection (2 off, D+ & D-).

 

I am trying to get both the keyboard and the DVR to be able to PTZ, mainly so I can use the keyboard when at home and utilise the PTZ of the DVR when away.

 

I know the keyboard Baud Rate is 1922 as it displays it when powered up and I know the Camera address is 001 as I can retrieve this information from the camera menus but I don't know the Data Bit, Stop Bit, Parity or Flow Control information. I also believe the protocol to be Pelco D but cannot be 100% sure.

 

What's the best way to get these working together?

 

I hope someone can help.

 

Kind Regards

 

Nelix

[Nelix 0]

I'm beginning to think that this is not even possible, please correct me if I am wrong.